t talktalk to us
6475780849 2

cart my cart (0)$0.00
Please Select Currency:
Replacement Conductivity Shroud
larger imageMove mouse over the image to magnify
00926

Replacement Conductivity Shroud

The shroud is very important for the accuracy of the reading from the conductivity Truncheon and should always be replaced after cleaning.
US$2.90
excl GST
Qty.
FreeShipping-72px
FREE shipping Worldwide
On all products to any location in the world, minimum purchase $40
 

Replacement shroud Bluelab Conductivity/Temperature Probes and Truncheon Meters


The 'Shroud' (found at the probe end of the Truncheon) is very important for the accuracy and protection of the meter.

The shroud carries out three crucial functions:
  • Protects the probe tip from damage
  • Slows the movement of the solution to get a more accurate reading
  • The slots allow an even flow of solution to pass through to avoid air bubbles on the probe surface
The shroud is removed prior to the cleaning process.
 

Helpful tips:

 
  • Place your hand over the shroud for 30 seconds to help warm the plastic then gently pull away from the Truncheon body.
  • ALWAYS replace after you have cleaned the probe face.
 
 
  Applications
Applications-Floriculture Applications-Greenhouse Applications-Hydroponics
Floriculture Greenhouse Hydroponics
 
 
Conductivity probe care:
Technical information:

Bluelab Conductivity Probe Cleaning Instructions
The conductivity shroud is suitable for all Bluelab Conductivity/Temperature probes.

It can only be used on some Bluelab Truncheon Meters, and will not work on the twist type of probe.
 

 

You might also be interested in ...

Bluelab Probe Care Kit - Conductivity
US$11.90
excl GST
Qty.